Z Axes Tool Setter, Sensitive Precise Large Range Waterproof LCD Display Digital CNC Tool Setter with Magnetic

₹7,890.00
और मुफ़्त शिपिंग

Z Axes Tool Setter, Sensitive Precise Large Range Waterproof LCD Display Digital CNC Tool Setter with Magnetic

  • ब्रांड: Unbranded
द्वारा बेचा गया:

Z Axes Tool Setter, Sensitive Precise Large Range Waterproof LCD Display Digital CNC Tool Setter with Magnetic

  • ब्रांड: Unbranded

₹7,890.00

बचत करें ₹1,200.00 (13%)

RRP

₹9,090.00
स्टॉक में है
और मुफ़्त शिपिंग

14-दिन की रिटर्न पॉलिसी

द्वारा बेचा गया:

₹7,890.00

बचत करें ₹1,200.00 (13%)

RRP

₹9,090.00
स्टॉक में है
और मुफ़्त शिपिंग

14-दिन की रिटर्न पॉलिसी

पेमेंट के तरीके:

विवरण

Z Axes Tool Setter, Sensitive Precise Large Range Waterproof LCD Display Digital CNC Tool Setter with Magnetic

Features CNC TOOL SETTER: This is a high precise hardware tool for correcting and setting Z axes of CNC machine tool, sensitive and precise, the setting height is 50±0.01mm. WIDE RANGE: This Z axes tool setter has a large measuring surface, which can measure tools with a diameter greater than 24mm. RELIABLE MATERIAL: Alloy steel material is waterproof, rust and corrosion resistance. Small spring force can avoid breakage of small milling cutter and drill bit. CLEAR LCD DISPLAY: LCD screen is more intuitive and convenient for observation and operation, the metric and imperial unit is easy to switch. MAGNETIC BOTTOM: The bottom is magnetic design, anti skid, can be fixed on the worktable firmly, not easy to move, improving work efficiency. Spec: Item Type: Z Axes Tool Setter Material: Alloy steel Battery: 1 x LR44 button battery (shipped without battery) Range: Approx. 5mm/0.2in Reading Resolution: 0.01mm/0.0005in Repetition Precise: 0.01mm/0.0005in How to Use: 1. Before use, gently press the tool setting shaft several times to check whether the sliding is smoothly. 2. Wipe the magnet bottom and zero setting base surface of tool setter with a clean soft cotton cloth. 3. Wipe the worktable or workpiece that needs to determine the distance to the tool tip. 4. Place the tool setter upside down on the workbench or plane, and press it down gently to ensure that the zero setting base surface is fully aligned with workbench or plane, and then press the ZERO key to set. 5. After the zero setting is completed, set the tool setter on the worktable or workpiece plane directly below the machine tool tip, slowly move the tool tip down to contact the tool setting axes surface, and continue to slowly adjust it down until the reading on the LCD screen is 0.00mm, at this time, the distance between the tool tip and the worktable or plane is 50+0.01m. PackageList: 1 xZ Axes Tool Setter 1 x Storage Box Note: 1. The device can be used on the horizontal surface or side when height tolerance value is ±0.05mm. 2. The bottom of the setter contains a magnet adsorption device, and the bottom screw is used to fix the watch CORES and dial, which should not be removed at ordinary times. Package List 1 x Z Axes Tool Setter 1 x Storage Box
  • Fruugo ID: 399462542-850615336
  • EAN: 9301540582881

उत्पाद सुरक्षा जानकारी

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट उत्पाद सुरक्षा जानकारी देखें

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

उत्पाद सुरक्षा लेबल

CE Mark
सुरक्षा चेतावनियाँ: Please do not allow your child to handle this product alone to avoid swallowing or other injuries; adult supervision is recommended.
सामग्री: As shown in the figure

डिलीवरी और वापसी

2 दिनों के भीतर भेजा जाएगा

  • STANDARD: मुफ़्त - के बीच वितरण सोम 16 मार्च 2026–शुक्र 20 मार्च 2026 - मुफ़्त

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • Shenzhenshi Desheng Wangluo Keji Youxian Gongsi
  • NO,606-23-220,MeinianGuojiGuangChangZhaoshangJiedaoNanHaidadao yixiShenzhenGuangdong
  • Shenzhen
  • CN
  • 518000
  • GoodLuck856@163.com
  • 8613164761511

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • SINO-SEAR GmbH
  • SINO-SEAR GmbH
  • Feuerbachstrasse 11, 14471 Potsdam, Germany
  • Potsdam
  • DE
  • 14471
  • info@sino-sear.com
  • 4933195130908