WUPP CS-1956D1 Motorcycle Heated Grips with 5+1 Temperature Adjustable/1.5m ACC Cable •Smart Temperature Control: Equipped with an intelligent temperature control chip, offering five adjustable levels plus one additional setting, allowing you to customize the temperature to your preference easily •Memory Function: Features a memory function that recalls the last temperature setting, providing a convenient and user-friendly experience every time •Safety Standby Mode: Includes a standby feature where the white light stays on for 5 seconds, then flashes five times before automatic shutoff, preventing unnecessary battery drain and enhancing safety •Seamless Design: Built with a one-piece design to protect against rain and dust, extending product lifespan, while dual throttle line clips allow for broader installation options •ACC Line Connectivity: Connects to the vehicle's positive output line, ensuring the device powers down automatically with the ignition off, safeguarding the battery even if you forget to turn off the switch •Compact and Stylish Upgrade: Optimized for a smaller, lightweight build, with more responsive touch controls and a sleek, modern appearance •Enhanced Heating Efficiency: Upgraded for faster heating and a higher maximum temperature, delivering top performance among similar products under the same power and conditions •Comfortable Grip Design: Features a more popular, comfortable grip texture with improved materials, ensuring non-stickiness during summer, enhanced durability, and a snug fit with the body once heated •Specification: •Model: CS-1956D1 (Oval Metal Switch) •Net Weight: 319g •Material: Nitrile Rubber •Input Voltage: DC 12V •Handle Length: Left Handle: 121mm; Right Handle: 133mm (without handle cap) •Power Output: Level 1 (Red Light): 32W, Level 2 (Orange Light): 24W, Level 3 (Yellow Light): 16W, Level 4 (Green Light): 13W, Level 5 (Blue Light): 10W, Standby Mode (White Light): 0W (power output measured at 12V) •Operating Temperature Range: -20°C to +50°C •Handle Type: Sealed or open-end electric heating handles •Compatible Tube Diameter: 22mm •Switch Type: Metal multi-level adjustable temperature control switch with memory •Switch Mounting Method: Rearview Mirror Mount, Adhesive Mount •Protection Voltage: When the input voltage is ≥16V, the system can power on, but the white light will flash rapidly 3 times and then power off •Usage Instructions: •Wiring: The red wire is the positive terminal, the black wire is the negative terminal, and the yellow wire is the ACC line. Please connect correctly to avoid product damage. •Power Button: Press the power button once to switch between settings or to turn on the device. •Auto Power-On: The device powers on when connected and starts at the last used setting (or the default standby mode if it's the first use). It does not change settings upon startup. •Memory Function: The device remembers the current setting even if power is lost. Press and hold for 3 seconds to power off. •LED Indicator: Different settings are indicated by LED colors: 100% red, 75% orange, 50% yellow, 40% green, 30% blue, standby: white. •Protection Features: Includes surge and reverse connection protection, as well as ACC control functionality. •Note: •Reversing the polarity of the product may cause damage. If the polarity is reversed for less than 5 seconds, circuit protection can prevent damage. Please ensure the correct polarity before connecting. •Before installing the product, please check its operation. If there is excessive power consumption, an aging battery, or too many electrical devices causing insufficient power supply from the alternator, this product may not function properly. •Prolonged use may cause low-temperature burns. Do not use for extended periods. At maximum output, the temperature will be very high. •We shall not be held liable for any damage caused to the customer by this product under any circumstances. Thank you for your understanding. •Using the handlebar when the engine is off may result in battery depletion. Ensure that the heated handlebar is used only when the engine is running. •If you notice any abnormalities, please stop using the product immediately and contact us promptly. •Package included: •2 x Heated Grips •2 x Handlebar End Plugs •1 x Stainless Steel L-shape Bracket •3 x Cable Ties •1 x Adhesive