Wind Charge Controller 500W Mini Wind Turbine Generator Controller Waterproof Wind Turbines Generator Charge Controller 12V/24V

Wind Charge Controller 500W Mini Wind Turbine Generator Controller Waterproof Wind Turbines Generator Charge Controller 12V/24V Functions: 1. This controller can control the wind turbine generator to automatically charge the battery. 2. Modular design ensures the performance of the whole system to the greatest extent. 3. Comprehensive waterproof protection. Matters needing attention: 1. Confirm that the output voltage of the wind turbine generator is consistent with the rating voltage of the battery. 2. Connect the wires in the following order, first connect the positive and negative poles of the battery, and then connect the three-phase voltage output of the fan. 3. Please connect the battery and wind turbine to the controller in strict accordance with the instructions. Reverse polarity or wrong position will lead to abnormal operation of the system or even complete damage to the controller. Wiring mode: 1. Connect the positive and negative poles of the battery to the positive (red) and negative (black) terminals of the battery of the controller. 2. Respectively connect the three-phase output voltage of the wind turbine to the three-phase input (green line) terminal of the controller fan. Parameters： 1、Maximum input AC voltage: AC35V; 2、Output voltage: 12V / 24V; 3、Battery charging cut-off voltage: 14.5V ± 0.3V / 29V ± 0.3V; 4、Maximum charging current: 15A (12V) maximum charging current: 10A (24V); >5、Wind driven generator speed limit voltage 14.5V ± 0.3V, 29V ± 0.3V; 6、Protection level: IP67; 7、Static power consumption: 0.008A; 8、Bearing power: 500W; 9、Maximum bearing wind speed: lvl.12; 10、Working temperature: -35 ° C - 65 ° C 11、Input wiring: three-wire system; 12、Control mode: 12V/24V compatible; 13、Installation method: bolted; 14、Wiring is shown in the schematic figure; do not reverse the positive and negative poles to avoid burning the controller. Packing list: 1*Wind Charge Controlle See more product details 1.High Power Generation Efficiency: MPPT boost charging technology is adopted, which can be started at low breeze pressure, with sufficient energy, and can solve the problem of slow fan speed and inability to charge. 2.Great Durability: Filled with thermal conductive silica gel and well sealed, Wind Power Regulator is durable, wear-resistant, and anti-circuit oxidation, light, and compact in size design, which can be used in harsh environments of high and low temperatures - 35 C - 65 C. 3.Safe Usage: Wind Power Charge Regulator is safer and more convenient to use, and has overcharge protection, reverse connection protection, short circuit protection, and high-temperature protection, iP67 waterproof, and dustproof. 4.Upgrading Technology: Wind Turbine Charge Controller has improved the charging capacity, the utilization efficiency of the power generation system, and the energy conversion rate. 5.Universal Compatibility: Has a strong universality, Wind Turbine Controller can automatic identification 12v 24v voltage and adjustment and switch, applicable to most wind turbines. _x000D_