WAVESHARE ESP32-P4-WIFI6 7-Inch Five-Point Touchscreen Development Board 1024x600 Resolution Product Introduction: This product is a high-performance development board based on the ESP32-P4 chip, featuring a dual-core plus single-core RISC-V architecture. It includes an onboard 7-inch 1024 × 600 resolution IPS touchscreen display and supports a variety of human-machine interaction interfaces, including MIPI-CSI with an integrated image signal processor (ISP), and a high-speed USB OTG 2.0 HS interface. The ESP32-P4 chip integrates a digital signature peripheral and a dedicated key management unit to ensure data and operational security. Designed for high-performance and high-security applications, it fully meets the higher demands of embedded applications in terms of human-machine interface support, edge computing capabilities, and IO connectivity. Product features: 1. Processor: equipped with a RISC-V 32-bit dual-core processor (HP system), with DSP and instruction set extensions, and a floating-point unit (FPU), with a main frequency up to 360MHz. 2. Equipped with a RISC-V 32-bit single-core processor (LP system), with a main frequency up to 40MHz. 3. Equipped with an ESP32-C6 WIFIBT coprocessor, extending WIFI 6Bluetooth 5 and other functions via SDIO. 4. Resolution: 1024x600 5. Communication Interface: Supports RGB565, RGB666, RGB888 6. Display panel: IPS 7. Touch type: capacitive 8. Touch chip: GT911 9. Brightness: 350cdm2 10. Contrast ratio: 600:1 11. Viewing angle: 160 degrees 12. Dimensions: 99.17x164.28mm 13. Display size: 86.42x154.58mm 14. Display colors: 16.7M colors Memory: 1. 128 KB high-performance (HP) system read-only memory (ROM) 2. 16 KB low-power (LP) system read-only memory (ROM) 3. 768 KB high-performance (HP) L2 memory (L2MEM) 4. 32 KB low-power (LP) SRAM 5. 8 KB system tightly coupled memory (TCM) 6. 32 MB PSRAM stacked in the package, 32MB Nor Flash connected via QSPI interface Peripheral Interfaces: 1. Onboard Type-C USB 2.0 OTG