Watchy V2.0 PLUS Programmable Electronic Watch ESP32 Based Fully Open Source Electronic Watch Smart Watch E-Paper Watch

₹5,990.00
+ ₹1,208.99 शिपिंग

Watchy V2.0 PLUS Programmable Electronic Watch ESP32 Based Fully Open Source Electronic Watch Smart Watch E-Paper Watch

  • ब्रांड: Unbranded

Watchy V2.0 PLUS Programmable Electronic Watch ESP32 Based Fully Open Source Electronic Watch Smart Watch E-Paper Watch

  • ब्रांड: Unbranded
RRP: ₹13,190.00
मूल्य: ₹5,990.00
आपकी बचत: ₹7,200.00 (54%)
द्वारा बेचा गया:
₹5,990.00
+ ₹1,208.99 शिपिंग

स्टॉक में है

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

Features: Watchy is an E-Paper watch with open source hardware and software. It has a barebones design utilizing the PCB as the watch body, allowing it to be worn as-is, or further customized with different 3D printed cases and watch straps. It is a wearable development platform. Watchy's E-Paper display delivers a beautiful crisp image clearly visible under bright sunlight, Ultra-low-power e-paper 1.54 INCH display, a At 200x200 pixels and monochrome, the display offers a distinctive aesthetic. Watchy has both WiFi & Bluetooth LE connectivity, allowing it to connect with internet APIs (e.g. Weather, News, Traffic, Maps, Spotify, etc.), as well as Bluetooth enabled devices. We chose the ESP32 for its large community and support for a wide variety of development options (for Arduino, Micropython, ESP-IDF, Zephyr-RTOS, etc.)<br><br>Specification: 1.3-axis accelerometer with gesture detection 2.Real-time clock for accurate time keeping with calendar and alarm functions 3.Built-in USB-to-serial adapter for programming on the go 4.Vibration motor for alerts 5.Four tactile buttons 6.Special Note: Be sure to select hardware version V2.0 when rooting. 7.Note: Not waterproof Note: 1. Click Set Wifi in the watch main menu. 2. Connect to the "Watchy Ap" wifi from another device, such as a mobile phone or computer/laptop. 3. Open 192.168.4.1 in your browser. On an iPhon, this page opens on its own when connected to wifi. 4. Click on "Configure WiFi" 5. Enter the SSID and password. (Note: SSID can be pre-filled through the network listed at the top of this screen) 6. Click the "Save" button and wait for Watchy. Seven. If the connection fails, the watch will display "Setup failed and timed out!" Otherwise, the local IP address and SSID of the connected network are displayed and confirmed.<
  • Fruugo ID: 430073404-903319171
  • EAN: 8720389221415

डिलीवरी और वापसी

2 दिनों के भीतर भेजा जाएगा

  • STANDARD: ₹1,208.99 - के बीच वितरण सोम 24 नवंबर 2025–सोम 01 दिसंबर 2025

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Therobe Store 2
  • Dongguan Lifeng Filter Trading Co., Ltd.
  • No. 31, Dongxia 8th Alley, Building 1, Room 602
  • Dongguan
  • CN
  • 523901
  • gserghe5566@163.com
  • 18506810445

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • Prolinx GmbH
  • Prolinx GmbH
  • Brehmstr.56,Duesseldorf,Germany
  • Duesseldorf
  • DE
  • 40225
  • eu@eulinx.eu
  • 2113105498