Features: 1Removable for cleaning, it is more convenient to clean the stains of toothpaste residue. 2Complimentary 4 toothbrush holders, 3 toothbrush holders and razor holders to meet customer needs. 3Large?capacity battery, no need to worry about power problems, can be installed at will, fast charging, long?lasting battery life. 4It is easy to operate, just close the lid and press the switch to clean it. It has a led display, 360s cleaning time, and it will automatically shut down when the time is up. 5The use of adhesive pendant, no need to punch, no trace installation, strong adhesion, suitable for a variety of wall, an extra adhesive sheet, can replace after a long time. Condition:100% Brand New Item Type: UVC Toothbrush Holder Material: Plastic Size: Approx. 20 x 7.2 x 4.2cm/7.9 x 2.8 x 1.7in Ultraviolet wavelength: UVA390-410nM Battery capacity: 1800mah Installation Method 1. Choose a suitable location and wipe off the dust and water marks on the wall before installation 2. Use a hair dryer to heat the double-sided tape on the fixed back panel to make full use of the viscosity 3. Tear off the paper on the double-sided tape 4. Stick the fixed back plate on the wall and squeeze it hard to exhaust the air 5. After the fixed back plate is stuck for 24 hours, hang the product on the hole position 6. Equipped with 4-position toothbrush holder and 3-position toothbrush holder + top knife holder to choose to use (development diagram) Charging method 1. When using this product for the first time, it is recommended to completely charge it before using it. 2. Insert one end of the charging cable into the charging port, and the other end into the mobile phone charger (commonly used with 5V-1A mobile phone chargers). 3. When charging, the red light of the charging indicator will be on, and the display will be tuned clockwise at the same time the blue light will always be on when it is completely charged, and the display box will appear in a completely charged state. (When the battery is low, the indicator light flashes red, please charge in time) 4. Charging time is about 2 hours (slightly increase or decrease according to different charging conditions). Tip: If you need to clean at the same time during charging, just press the cleaning push to start the countdown for 360 seconds to clean, and the screen will resume charging display state after cleaning is completed . Instructions 1. Open the product cover, put the toothbrush into the toothbrush holder, and close the upper cover (Note: Please dry the water on the toothbrush before putting it into the sterilizer) 2. Press the cleaning switch to start the cleaning function, a 360-second cleaning time will appear on the display, and it will automatically shut down after cleaning. 3. If you want to stop cleaning ahead of schedule, press the cleaning switch to stop immediately. 4. When the face cover is opened, the cleaning function cannot be turned on. Package Included: 1 x Toothbrush Cleaning Box 1 x USB Line 1 x Sticker 2 x Toothbrush Rack 1 x Manual