["brand new and high quality\r\n\r\nFeatures:\r\nThe USB-CAN debugger is a CAN bus debugger with a USB 2.0 interface and a CAN interface. Through the USB-CAN debugger, the computer can be connected to the standard CAN network through the USB interface, which can transfer, collect, and process data conveniently, quickly, and accurately. \r\nThe USB-CAN debugger supports any baud rate between 5Kbps and 1Mbps, and is widely used in fieldbus test labs, industrial control, intelligent buildings, automotive electronics and other fields.\r\nApplication areas:\r\nCAN network teaching, development, testing;\r\nFast CAN network data acquisition, data analysis;\r\nCAN network replaces RS485 network;\r\nLarge flow, high speed CAN communication network;\r\nIndustrial site CAN network data monitoring.\r\nProduct main performance indicators:\r\nUSB interface supports USB2.0, for USB1.1\r\nProtocol conversion between USB and CAN bus;\r\nSupport CAN protocol 2.0A and 2.0B active mode;\r\nSupport two-way transmission, CAN transceiver;\r\nSupport CAN identifier standard format (11 digits) and extended format (29 digits);\r\nSupport data frame, remote frame format;\r\nCAN controller baud rate up to 1Mbps, software configuration;\r\nSupport automatic retransmission mode, which can be configured by software;\r\nSupport automatic offline management mode, which can be configured through software;\r\nSupport 14 filters, which can be configured by software;\r\nSupport WINXP/7/10 32/64 bit.\r\n\r\nSpecification:\r\nType: USB To CAN\r\nDimensions: 5.7x2.3cm/2.24x0.91inch\r\nColor: As shown\r\nQuantity: 1 Set\r\nNote: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.\r\n 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\r\n\r\nPackage includes:\r\n1 Set USB To CAN Debugger"]