USB multi-function screen four high-precision tester - Adopt 12800 pixel IPS LCD screen. General test of various USB digital devices, support Qualcomm QC3.0/2.0/MTK-PE fast charging voltage. A of parameters on one screen display, real-time monitoring of charging voltage, current, power, capacity, power, timing, temperature (Celsius/Fahrenheit, etc.) Real-time monitoring of the charging status of various data Cable - U96 USB color tester can monitor the charging data of the mobile phone in real time, supporting QC3.0 (3.8-12V, -/+0.2 step). Support QC2.0 (5V9V12V20V), Android BC1.2 (5V), 5V2.4A and MTK-PE (5V/7V/9V/12V). Wait for the fast charging voltage range to charge! Smart repair hardware, poor software calibration technology - Press and hold the USB tester button when no power is on, and insert the USB charger to enter the background calibration mode. Press the button shortly to switch to the corresponding calibration function, long press to confirm the corresponding calibration function! (Tips:This calibration must use 5V standard voltage and 2A constant current power supply, no misoperation is allowed.) Support for super fast charge detection - Support various fast charge detections such as for /for /for /for , DCP (9V2A), SCP (4.5V5A). Super flash charging 4.5V5A, for /for Qualcomm 5V9V12V and other fast charging protocols Color screen display on/off function - By pressing the button to switch the interface to the information screen to turn off the display, you can also charge the device normally! Click the button to wake up the display again; General test various USB chargers - Through the constant current load, you can test whether the voltage and current power of its charger meet the nominal value. Voltage measuring range:3.60V - 32.5 V Resolution precision:0.01 V Current measuring range:0.00A - 5.00 A Resolution precision:0.01 A Power cumulative range:0 - 999999 WH Resolution precision:0.001 Wh Capacity range:0 - 999999 mAH Resolution precision:0.001 Ah Temperature:0 - + 80 Resolution precision:1 D+ Voltage:0.000V - 2.999 V Resolution precision:0.001 V D- Voltage:0.000V - 2.999 V Resolution precision:0.001 V Load impedance:0 - 999 ohm Resolution precision:1 ohm Power metering range:0 - 299.999 W Resolution precision:0.001 W Timing maximum time:999 H 59 M 59 S Resolution precision:1 S Time to refresh: 500 ms/time 500 ms/times Measurement rate:0.5 times/s Use equipment of the same metal manganese bronze sampling resistor(1.0 mm diameter metal manganese bronze material Less than 0.05R) Since the power flow:Less than 0.003 A(Less than 3mA) Working temperature:- 10 - + 60 Working humidity:10 - 80 () The pressure of work:80 - 106 kpa Cumulative capacity range:0-99999 mah precision: 0.001 Ah (New features or D+ D- Voltage) Net weight:19g Display Color:IPS color Colour:Black Material:Plastic Size:65 x 24 x 14 mm Package Contents: 1 * USB tester Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.