USB Temperature Data Recorder 10000 Groups Storage High Accuracy Disposable Portable Temperature Logger

Feature:1. [USB Connector] This temperature recorder has a USB connector design, can directly connect to a PC or phone to read, without cables or readers.2. [PDF Data Report] After recording finished, you can directly insert the temperature data recorder into the computer to get the PDF report.3. [10000 Group Storage] The recorder has a wide range of temperature measurement, and can store 10000 groups of data.4. [High Accuracy] The temperature logger records the temperature every ten minutes, with high accuracy and sensitivity, small in size and easy to carry.5. [Wide Use] The data recorder is widely used to monitor the temperature records of food, medicine, chemical products etc. during transportation and storage.Specification:Item Type: Temperature Data RecorderMaterial: ABSModel: TempU05Size: Approx. 67x28mm/2.64x1.1inType: DisposableAccuracy: ±0.5℃ (-20℃ to 40℃)Out of Range: ±1℃Recording Interval: 10 minute (60 day)Optional Data Capacity: 10000Alarm Temperature Range: <2℃ OR >8℃ (<35.6℉ OR >46.4℉)Delay Recording: 30 minutesWorking Ambient Temperature: -30℃ to +60℃Introduction:The disposable USB temperature recorder is a simple and portable temperature recorder designed for cold chain. This product is widely used to monitor the transportation and storage processes of food, medical, chemical products, etc. After recording, you can directly insert it into the computer to obtain the PDF report.How to Use:1. Press and hold the Start Stop button for more than 3s, and the OK indicator is always on for 3s, indicating that the device starts recording, and then you can place the device in the environment you need to monitor.2. During the recording process, the equipment will automatically light up every 10s. If the normal indicator light (green light) lights up every 10s, it means that the equipment has no overtemperature during the recording process. If the alarm indicator light (red light) lights up every 10s, it means that there is overtemperature during the recording process. Note: as long as the overtemperature is found during the recording process, the green light will no longer light up.3. Press and hold the Start Stop button for more than 3s, and the alarm indicator (red light) is always on for 3s, indicating that the equipment stops recording. The device will also automatically stop recording when it is full of data. After the equipment stops recording, it will not flash automatically. To detect whether the equipment is overtemperature during recording, press the Start Stop button briefly. If the normal indicator light (green light) is on, it means that the temperature is not overtemperature during recording. If the alarm indicator (red light) is on, it means that the temperature is over during recording.4. Tear off the waterproof packaging bag and insert the device into the USB interface of the computer. The normal indicator light (green light) and alarm indicator light (red light) will turn on during the PDF file generation process. When the file is generated, the normal indicator light (green light) will continue to light up until the recorder is removed from the computer..Package List:1 x Temperature Data Recorder