1. USB Logic Analyzer each channel at up to 24M times per second 2. The logic has 8 channel inputs-you can monitor 8 different digital signals simultaneously. 3. This kit contains 12pcs SMD IC 6 Colors Test Hook Clips which are ideal for using this 24MHz 8CH logic analyzer. 4. All the way to the logical pen instructions, with a small light to indicate the level of CH1, very intuitive. 5. The data is uploaded in real time, the upper computer adopts compressed storage, and the maximum collection depth is 10T, far exceeding the actual demand Complete support for trigger modes, rising edge, falling edge, high level trigger, low level trigger, and the above four basic methods combined into a complex trigger. If you are doing microcontroller, ARM system, FPGA development, we highly recommend you purchase this product! This item help you solve your problem when you do MCU related products, especially for UART, SPI, IIC and other communication debugging. Item Type:USB Logic Analyzer Input Characteristics: Capacitance: 5PF Impedance: 100K (This is the more reasonable impedance we adopted after weighing, and it is only the mainstream parameter.) VIH (input Can Recognize High Level): Higher than 1.6V is recognized as high level. (It can be used to stably collect signals at 5V, 3.3V, 2.5V, 2.0V level. It can also work in 1.8V level system, but it is not very recommended.) Sampling Speed Record: 24MHz. 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500KHz, 250KHz, 200KHz, 100KHz, 50KHz, 25KHz. Colour: Material:Plastic Package Contents: 1 x USB Logic Analyzer 1 x USB Cable 1 x Cable (the cable color is random, and the designation is not accepted) 12 x test clips(2 for each of 6 colors) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.