The FT232R is a USB to serial UART interface A low-cost way to add USB capability to microcontrollers. Use this to give your own breadboard For USB capability for bootloading or downloading sketches. RXD/TXD transceiver communication indicator Includes over-current protection, using a 500ma self-restoring fuse This board includes a DTR pin needed to auto-reset when downloading to your device. USB Supply: 3.3V or 5V Size:43x17mm Blue FT232 module Support windows8. TXD, RXD, , : Use curved pin header to lead. FT232R introduction: With the development of computer technology, parallel ports and serial ports have slowly disappeared on PCs. Nowadays, even desktop computers have few parallel ports. But for engineers, both parallel and serial ports are essential interfaces, especially serial ports. For computers without a serial port, a convenient solution is to use a USB-to-serial chip to virtualize a serial port. Many manufacturers produce such chips, such as CP210x series from silicon LABS, TUSB3410 from TI, CH34x series from Nanjing Qinheng, and FT232 series, Prolific PL230x series, ARK3116, etc. From the perspective of stability, the FT232 series is still reliable, and you can use it to debug the program without worrying about the blue screen. The FT232R chip is a single-chip solution. Generally, peripherals are not required for general use. Even the crystal oscillator, USB matching resistor, and EEPROM for product information have been integrated inside. FT232R also has some more useful functions. For details, please refer to the FT232R data sheet. Colour:As shown Material:PCandMetal Package Contents: 5 x serial to usb adapter Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm.