["Description:\nbrand new and high quality.\nFeature:\nIt is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter. It has 4 Relays which can make the equipment turn or reverse, on/off and so on come true. \nThe volume is small and the performance is stable and reliable, high receive sensitivity.\nUsing wireless encoding technique, non directional switch, do not interfere with each other.\nIt covers application ranging from simple domestic remote control to autonomous control, like auto door, window, lifting equipment, entrance access, up and down controller, alarm system industrial control and security etc.\nThese remote controls are designed to control a wide variety of electronic devices with a wireless signal.\nExtremely easy to set up and use.\nfor 2262 / 2260 / 1527 / 2240 etc chip and several code wireless remote control. So it can meet someone's need of choosing the wireless remote control as they like to work with it .\n\nSpecifications:\nItem Type: Receiver+Transmitter\nWorking voltage: DC12V\nReceiver sensitivity: more than -105dBm\nWorking Mode: Jog mode, inter-locked mode, self-locking mode\nMaterial: ABS\nSize: Outer Shell: 75x53x28mm/2.9x2.08x1.1in, Inner Board: 66x46x17mm/2.5x1.8x0.6in\nColor: Black\nFrequency: 433mhz\nOptional Type: 1, 2, 3, 4, 5, 6, 7\nQuantity: 1 Set\n\nInstructions:\n1.Press the learning code, the indicator flash, loosen your finger, press any button of the remote control, the indicator flash 2 times and off, it means you learn it successfully.\n2.It can learn more than 2262 or 1527 chip with the different code wireless remote control.\n3.Remove/Clean: press the learning button about 8 seconds, the indicator turn on to off, it means the information that you keep have been removed successfully.\nOutput working way:\n1.Self-lock: connect the JP1 with the cutting out cap.\n2.Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.\n3.Inter-lock: Connect the Jp2 with the Cutting out cap.\nJog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).\nSelf -lock: press one button for one for time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).\nInter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).\n\nNote:\nTransition: 1cm=10mm=0.39inch\nPlease allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid.\nDue to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!\n\nPackage Includes:(Optional)\nType 1: 1 x Receiver\nType 2: 1 x Remote Control Transmitter\nType 3: 1 x Receiver\n 1 x Remote Control Transmitter\nType 4: 1 x Receiver\n 2 x Remote Control Transmitter\nType 5: 1 x Receiver\n 3 x Remote Control Transmitter\nType 6: 1 x Receiver\n 4 x Remote Control Transmitter\nType 7: 1 x Receiver\n 5 x Remote Control Transmitter"]