Universal Ceiling Fan Remote with Timer and Speed Control - Easy Installation

Cautions: - If the new device cannot be remote controlled, check whether the barcodes on the emitter and receiver match, whether the indicator light on the emitter is functioning, whether the receiver’s cable is properly connected, and whether the buzzer emits a single beep when powered on. - If the receiver cannot be controlled by the emitter, check whether the battery contacts are secure and whether the battery has sufficient power. Replace the battery promptly when depleted. Insensitive remote operation may result from environmental interference or low battery. - Remove the battery if the device will not be used for an extended period. Wire the device strictly according to the specifications indicated on the labels; improper wiring may significantly reduce device lifespan or cause immediate malfunction. The antenna must not be connected to any other wires. - If the fan has a code switch, set the fan to the highest speed before using the remote. The receiver emits a beep when a remote button is pressed, which may be audible in quiet environments. Ensure adequate space inside the fan canopy or mount the receiver beside it as needed. Operating Voltage: AC 90–220V Working Frequency: 50–60 Hz Remote Control Distance: Over 20 meters Supported Encoding: 1527 learning code Operating Mode: 1527 remote control Load Capacity: - Ceiling Fan: Up to 300W - Incandescent Lamp: Up to 1000W - LED / Energy-Saving Lamp: Up to 200W Do not exceed maximum load capacity. Remote Control Battery: Requires 2 AAA batteries (not included) Voltage Type: 220V / 110V Color: White + Black Material: Plastic Package Contents: - 1 × Controller - 1 × Remote Control - 1 × Wall Mount Bracket Note: Lighting conditions and display settings may cause slight color variation between the product image and the actual item. Measurement tolerance: ±1–3 cm.