Special Features:heating Mfg Series Number:seat heater Item Weight:0.4kg Item Height:2inch Item Width:5inch Item Length:8inch Set Piece:1 Applicable Season:Autumn And Winter Material Type:Flocking Cloth Origin:Mainland China CN:Guangdong Item Type:Seat Covers & Supports Name:Car Steering Wheel Heater Installation method::Built -in steering wheel Connection method::Steering wheel trace docking Features of mechanical switch::With heating memory function Features of electronic switch1:No heating memory function Features of electronic switch 2:Switch reset after the car goes off Multi -attribute option:Four different switch styles Suitable range::Most 12V voltage cars Cushion circumference:130cm Suitable for steering wheel size:Diameter less than 42cm Universal 12V Built-in Car Steering Wheel Heater Kit Carbon Fiber Heat Pads Independent Switch Control System with Harness Product Features: 1. The built -in car steering wheel heater, warm and does not affect the appearance, enhance driving comfort. 2. Low -power heater, using the heater in winter can reduce the power consumption of air conditioners, not only saving fuel, but also to reduce the feeling of air conditioner and help relieve driving fatigue. 3. Universal products, suitable for most cars in DC 12V systems, such as cars, SUVs, trucks, RVS, ships. 4. A seat heaters with a high -temperature switch system, 1 set is suitable for installing a steering wheel. 5. The production of carbon fiber, rapid heating, long service life, safety, not corrosion or rupture. Name of product: Built-in car steering wheel heater Specification: Material: Carbon fiber Color: White Heating area size: Approx.55cm x 10cm (21 3/5"x 4") Wire length: 1.6M (63'') Rated power of the whole set: DC 12V, 153W Rated wiring current: >=2.7A Temperature change range: 25c-50c Package Included: 2 x heating pads(Connected together) 1x switches Wiring beam installation method: 1. Red line connection switch ACC 2. Black line connects iron Heating tablet and wiring wiring method: 1. If you want to connect through the scarring disk, cut off the DC head, cut it off, peel it, there are two red 1 black lines 2. The two lines after peeling need to be connected through the tray, and the black line is connected to the negative pole control gear 3. The product current is small, without empty travelers, you can share it with other travelers 4. Set up a handle About the installation process Q&A 1 Q) Want to connect through a scarf? A) This product can be connected by the DC head by default. You need to connect through the scarf, and you can cut off the pair of DC heads. 2.Q) What should I do if there is no vacancy in the scarf? A product itself is not large, about 2.7A, which can share the other position with other. 3.Q) After the product is installed, it cannot be closed? A connects through the scarf, and both lines must be swimming. If the negative electrode of the heating film is connected to the iron, it will not be closed. 4.Q) Is there an extra place in the heating film, can it be cut? A without yellow heating silk can be cut off. 5.Q)will installation complicated? ARequires professional operations. Please test satisfaction before installation before installation.