UDB1005S Waveform Function Signal Generator DDS Module(5MHz )

Features 1. Signal aspects: The meter is able to generate sine, square, triangle and sawtooth 2. Measurement: The meter has the frequency measurement and counting functions 3. Scan aspects: It has scanning capability and can achieve frequency sweep with an arbitrary start and end point. 4. Storage and Recall function: With 10sets (M0~M9) parameter storage locations, data of M0 can be loaded as power on. 5. Suitable for laboratory, engineering technicians and hobbyists. Specification Features: Using FPGA design, it is easy to use and has high signal stability. It also has TTL output and external frequency measurement functions; the output signal can adjust amplitude and DC offsets Suitable for laboratory, engineering technicians and hobbyists. Signal aspects: The meter is able to generate sine, square, triangle and sawtooth Measurement: The meter has the frequency measurement and counting functions Scan aspects:  It has scanning capability and can achieve frequency sweep with an arbitrary start and end point. Storage and Recall function: With 10sets (M0~M9) parameter storage locations, data of M0 can be loaded as power on. Specification: Type(Optional):UDB1005S 5MHz US plug, UDB1005S 5MHz EU plug, UDB1008S 8MHz US plug, UDB1008S 8MHz EU plug Technical data ItemParameter OutputWaveformsine, square, triangle and sawtooth Output amplitude≥9Vp-p(No load)                    Output Impedance50Ω±10% DC bias±2.5V Frequency Range0.01Hz~2MHz(UDB1002S) 0.01Hz~5MHz(UDB1005S)  0.01Hz~8MHz(UDB1008S)                  Frequency resolution0.01Hz Frequency stability±1x10-6 Frequency error±5x10-6  Distortion of sine Wave≤0.8% (Reference frequency:1kHz)  Linearity of triangle wave≥98% (0.01Hz~10kHz)  Rise or fall time of square wave≤100ns  Duty cycle range of square wave1%~99% TTL Frequency Range0.01Hz~2MHz(UDB1002S)0.01Hz~5MHz(UDB1005S)  0.01Hz~8MHz(UDB1008S) Amplitude>3Vp-p Fanout factor>20 TTL Load MeasurementCounting range0-4294967295  Frequency range1Hz~60MHz 0.5Vp-p~20Vp-p      SweepRangefM1~fM2 Amplitude0.5Vp-p~20Vp-p SaveQuantity10 LocationM0~M9 Power supplyDC5V DimensionsL x w9.5*6.5cm/3.7*2.6in WeightHost Approx.255g/9oz ItemIntroductionItemIntroduction 11602LCD7 2DC5V Power supply interface8TTL Output 3Power switch9Knob 4Bias adjustment potentiometer10Button 5Amplitude adjustment potentiometer11Communication Interface 6Output terminal   Button Description: Item Introduction Move the cursor left or select adjustment items > Move the cursor right or select adjustment items SELECT The select button,it can switch between the up and down lines, which "*"indicates that the contents of this line can be modified. OK The "OK" button can switch the range of frequency when the "*"is in the first line ,and when the"*"is in the first line, the "OK" button can switch the waveform. ADJ Adjust the frequency OFFS Adjust the bias AMP Adjust the range Package list: 1 x DDS Signal Generator  1 x DC 5V adapter Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.