1Signal aspects: The meter is able to generate sine, square, triangle and sawtooth 2Measurement: The meter has the frequency measurement and counting functions 3Scan aspects: It has scanning capability and can achieve frequency sweep with an arbitrary start and end point. 4Storage and Recall function: With 10sets (M0~M9) parameter storage locations, data of M0 can be loaded as power on. 5Suitable for laboratory, engineering technicians and hobbyists. Features:Using FPGA design, it is easy to use and has high signal stability. It also has TTL output and external frequency measurement functions; the output signal can adjust amplitude and DC offsets Suitable for laboratory, engineering technicians and hobbyists. Signal aspects: The meter is able to generate sine, square, triangle and sawtooth Measurement: The meter has the frequency measurement and counting functions Scan aspects: It has scanning capability and can achieve frequency sweep with an arbitrary start and end point. Storage and Recall function: With 10sets (M0~M9) parameter storage locations, data of M0 can be loaded as power on.Specification:Type: UDB1005S 5MHz EU plugTechnical dataItemParameterOutputWaveformsine, square, triangle and sawtoothOutput amplitude9Vp-p(No load)Output Impedance5010%DC bias2.5VFrequency Range0.01Hz~2MHz(UDB1002S) 0.01Hz~5MHz(UDB1005S) 0.01Hz~8MHz(UDB1008S)Frequency resolution0.01HzFrequency stability1x10-6Frequency error5x10-6Distortion of sine Wave0.8% (Reference frequency:1kHz)Linearity of triangle wave98% (0.01Hz~10kHz)Rise or fall time of square wave100nsDuty cycle range of square wave1%~99%TTLFrequency Range