Features 2 WORKING MODES: This LED light has PIR motion sensor mode and constant light mode, with indicator lights for easy operation and switching. MAGNETIC BRACKET: Remove the tape from the magnetic bracket and stick it on any flat surface, then place the lamp on the magnetic bracket. BUILT IN BATTERY: This LED induction light strip has built in 600mAh rechargeable battery and can be charged anytime using the USB cable. LIGHTING DURATION: After being fully charged (blue light), it is induced to light up 5-8 times a day, continuously used for 2 months, continuously lit for more than 5 hours in the constant light mode. APPLICATIONS: This LED motion sensing light is suitable for maintenance, reading, jewelry identification, etc., suitable for use in bedrooms, closets, workshops, corridors, and stairwells. Specification: Item Type: LED Sensing Light Sensing Method: Human Infrared Sensing Induction Control: Built in Light Sensor Induction: 10ft/120° LED Quantity: 24pcs LED Lifespan: Over 80000 hours Light Color: Warm Light Lamp Operating Temperature: -10-50℃ Lamp Battery: 1 x 600mAh rechargeable battery (built in battery) Battery Usage: Charging and discharging more than 500 times Battery Fully Charged Usage Frequency: Greater than 600 times Induction On Time: 15 seconds Power: 1.5W2 Modes: PIR Motion Sensor Mode: ON turns on, the indicator light turns green. If motion is detected, the LED will light up, and if no motion is detected within 15 seconds, it will automatically turn off 2. Constant Light Mode: Press and hold the mode button for 2-3 seconds, the indicator light will turn red, switch to constant light mode, and turn off the light with OFF. Package List:1 x Sensing Light 1 x USB Cable1 x Magnetic Bracket with Sticker Package List 1 x Sensing Light 1 x USB Cable 1 x Magnetic Bracket with Sticker