Treadmill Motor DC Permanent Magnet Universal Engine 180V 3HP

_x000D_ _x000D_ Treadmill Motor DC Permanent Magnet Universal Engine 180V 3HP _x000D_ _x000D_ _x000D_ _x000D_ VOLTS.(V)180d.c _x000D_ _x000D_ _x000D_ R.P.M3800/4800 _x000D_ _x000D_ _x000D_ INS.F _x000D_ _x000D_ _x000D_ POWER(HP)3.0 _x000D_ _x000D_ _x000D_ AMPS.(A)5.5 _x000D_ _x000D_ _x000D_ WEIGHT(kg)7.3KG _x000D_ _x000D_ _x000D_ 1P CODE:1P20 _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ A:110mm _x000D_ B:103mm _x000D_ C:45mm _x000D_ D:265mm _x000D_ _x000D_ Notice: If you need to order a motor, please provide us with the dimensions of A B C D. _x000D_ Also, please provide us with a photo of your old motor _x000D_ _x000D_ _x000D_ Our motors can only replace yours. But our motor is not exactly the same as your original motor. _x000D_ _x000D_ NOTE: 1.It is recommended that you add more [special silicone oil] under the running belt of the treadmill every half month to maintain lubrication and reduce resistance. Each time you use it, you should use it in [fast running] instead of [slow walking] , which can extend the service life of your treadmill. _x000D_ 2.It is recommended to use for half an hour, rest for half an hour, use for another half an hour, and rest for another half an hour. _x000D_ 3. The speed below 5 kilometers per hour belongs to ultra-low speed operation, and the motor has poor heat dissipation, _x000D_ It is easy to cause motor heating, and the running time shall not exceed one minute, and the low speed running shall be several minutes _x000D_ Please speed up to more than 7km as soon as possible. _x000D_ 2. It can run continuously for 120 minutes at a speed of more than 7 kilometers per hour. _x000D_ _x000D_ Use according to our method, your motor will not be easily damaged. _x000D_ _x000D_ Product parameters: _x000D_ _x000D_ Skills requirement _x000D_ 1. The maximum working voltage of the motor should not exceed the rated voltage, and the voltage ripple should be as small as possible; _x000D_ 2. Motor lead wire: the red wire is connected to the positive pole, the black wire is connected to the negative pole, and the yellow/green combination color wire is grounded; _x000D_ 3. The grounding of the motor must be reliable; _x000D_ 4. Under normal temperature, the motor lead terminal and the end cover can withstand the AC1800V/50HZ/5mA/1s withstand voltage test without breakdown; _x000D_ 5. The motor runs under rated voltage, no abnormal vibration, no abnormal noise; _x000D_ 6.From the driving end, the motor rotates in a clockwise direction; _x000D_ 7. When running at no load, the motor performance meets the following requirements: _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_ _x000D_