Supports LED lighting equipment operating at 12-24V, including single color LED strips, LED recessed lights, LED chandeliers, LED displays, LED step lights, LED wall lights, LED spot lights, RV dome lights, and more. Operating voltage range: DC 12V-24V. Output voltage equals input voltage. Rated for 60W at 12V DC and 120W at 24V DC. Easy installation: Plug-and-play design for use with LED strips. For indoor use only. Includes adhesive tape for mounting on clean, flat surfaces. Do not install on metallic surfaces. Avoid handling the controller with hands while operating the LED. Touch control: Short touch to turn the light on/off. Long touch to adjust brightness from 10% to 100%. Brightness adjustment: Long press any area of the dimming controller to gradually change the brightness of the PWM FCOB single color LED strip from 10% to 100%. Release the touch when desired brightness is reached to maintain the level. Do not reverse the wiring; incorrect connection may cause the mini dimmer switch controller to overheat or short circuit. Input voltage: DC 12V/24V Maximum power: 60W at 12V DC, 120W at 24V DC Color: Silver Material: Metal Package includes: 1 x Touch sensor switch 1 x Double-sided tape (color may vary, no specific color guaranteed) Content limited to items listed; other accessories not included. Note: Lighting and display differences may cause slight color variation between the product image and actual item. Measurement may vary by +/- 1-3 cm.