This 6A/250VAC on/on 2 Way SPDT Right Angle 3 Pins Toggle Switch provides reliable two position control for electrical circuits. It uses a single pole double throw (SPDT) configuration with onon operation, allowing the common terminal to connect to one of two outputs depending on the toggle position. The right angle design enables compact mounting in tight spaces, while three terminals offer straightforward wiring for simple circuit routing. Key benefits Two ON positions for selecting between two circuits without an OFF state. Threeterminal SPDT configuration (common, normally open, normally closed) for versatile wiring. Right angle form factor suitable for compact or constrained installations. Rated for up to 6A at 250VAC, making it appropriate for common mainslevel switching needs within its spec. Simple, intuitive toggle action provides clear, tactile feedback for routine operation. Key attributes Configuration: SPDT (single pole double throw), onon Terminals: 3 pins Position: Right Angle mounting Electrical rating: 6A at 250VAC Operation type: Onon, two selectable output paths Applications Power routing in control panels: switch between two power sources or feed two different circuits from a single common line. Lighting or load selection in small mainspowered devices: quickly choose between two outputs without an off state. Educational or hobby electronics and test benches: demonstrate SPDT switching behavior with a simple, reliable component. This switch aligns with the specified model and features: 6A/250VAC rating, on/on 2 Way SPDT operation, right angle mounting, and 3pin configuration. It is suitable for applications requiring a compact, twoposition SPDT switch capable of handling AC loads up to 250VAC and 6A.