Item Type: Temperature Controller Model: TMC-6000 Material: ABS Power Supply: DC /AC 110-240V Uses: used in various cooling and heating scenes Power: 2W Button: Push-type membrane keyboard Input: One-way (10K) NTC thermistor temperature sensor output, measuring range -50C to 120C Output: 1. One-way relay NO touch point is used for cooling output, and NC contact is used for heating output. 2. The current capacity of the output contact is limited to 5A for load and 1A for inductive load. It can control 1000W electric heating or 200W electric motor or water pump. An AC contactor is needed to expand the capacity to obtain a larger load. Working Temperature: -10C to 50C Measuring Range: -50C to 120C Setting Range: minimum limit: -45C to control the temperature, maximum limit: control temperature to 110C Control Range: -45~110C Temperature Control Return Difference: 1~30C Delay Time: 0~300S Deviation Correction: -25~25C Package List 1 x Temperature Controller 1 x NTC (10K) Temperature Sensor Line 1 x User Manual The maximum load current is 10A, please ensure the allowable value (about 6A) during longterm use to increase the use time. The parameters and settings in the user manual are the parameters when the load is connected to the NO terminal. If you need to connect to the NC side, please set it accordingly. 1It adopts DIN rail type installation, which is convenient and quick to install. 2Advanced isolated power supply ensures its stablity and reliability, and the continuous working power supply varies between 110V~240V ADC. 3Digital temperature controller has delay protection and powerdown memory protection function. 4The temperature sensor line can be connected to the ordinary line for 100 meters. 5Temperature regulator can set parameters to save longterm memory of power failure.