Item Type: Time Delay Relay Module <br>Working Voltage: DC 12V <br>Static Current: 20mA <br>Working Current: 50mA <br>Signal Source: Positive trigger, PNP, high level effective <br>Output Capacity: Can control DC30V 10A or AC250V 10A or less equipment <br>Service Life: > 100,000 Times<br>1、MULTIPLE FUNCTIONS: Time delay relay module add power prevent reverse function, output optocoupler isolation, enhance interference resistant power consumption. Industrial grade circuit board, set parameters after power memory forever, ensure stability. Industrial grade plate with PLC level control <br>2、ROTATABLE MODE: After turning on, press and hold K1 for 2 seconds to enter the selection function mode, which can be selected from P1?1 to P1?4 <br>3、P1?2 OPERATING MODE: When the relay pulls in Y to disconnect, the signal triggers the start time of X time. The user can set the time when the relay pulls in X and Y, similar to P1?1. The blue light on indicates the time when the relay is off, and the blue light off indicates the time when the relay is off <br>4、P1?3 WORKING MODE: Open for X seconds, disconnect for Y seconds, infinite cycle. The user can set the time X and Y of the relay. The time setting is similar to P1?2. Press K1 to enter the fine tuning settings of this function, start X, turn off Y seconds, press K1, disconnect X, turn on Y seconds, and then press again to repeat the default first setting <br>5、P1?4 WORKING MODE: The signal trigger relay draws but does not start timing, the trigger signal disappears and starts timing T. When the time is up, the relay closes; During the delay, the signal is given again, the delay is cancelled, the suction is maintained, and the signal disappears. Restart the clock; Equivalent to the start button release, often used for power delay. The user can set the time for the relay to draw. The time setting is similar to P1?11 x Time Delay Relay Module