Features With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current. The efficiency can be up to 96%, measured at 20A, converting 24V to 12V. It is designed with 75V/80A large current dual MOS tube.The buck module has 2 heat sink that could enhance heat dissipation. Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output. Wiring is convenient with these large current 30A screw terminals.When there is a big difference between input and output voltage, please decrease power and current. Specifications:Input Voltage: 6V to 40V DC(10V to 40V is suggested)Output Voltage: 1.2V to 36V DCOutput Current: 20A(max.), 15A(suggested, )Efficiency: 95%(24V to 12V, 20A) Output Ripple: ≤50mVWiring Method: TerminalShort Circuit Protection: Self-recovery(cannot short circuit for long time)Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06" VO+ Output positive When input and output is common grounded, no-load CV output constant voltage, CC output constant current VO- Output negative +IN Input positive -IN Input negative CV Output voltage adjustment CC Output current adjustment EN Enable, low voltage level shut off output; suspension, high voltage level is effective Package Includes:1 x Module Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Package List