Thin Film Pressure Sensor Quick Response Static and Dynamic Pressure Sensing Force Sensitive Resistor

Feature:1. PRODUCT INFORMATION: A resistive sensor is a flexible thin film sensor whose resistance value decreases with the increase of pressure acting on the sensing area.2. OPERATING PRINCIPLE: A single sensing zone sensor is equivalent to a dual port variable resistor whose resistance value is controlled by pressure, and it is also equivalent to a switch with a certain threshold value, which is jointly determined by the pressure and equipment parameter setting.3. FINE WORKMANSHIP: The sensor is composed of polyester film with excellent comprehensive mechanical properties, strong conductivity FPC material, and nanoscale pressure sensitive material. The top layer is a flexible film and a composite pressure sensitive layer on top, while the bottom layer is a flexible film and a composite conductive circuit on top.4. USE DETAILS: Two are bonded and isolated from the sensing area through double sided tape( not included). When the sensing area is under pressure, the lines that are disconnected from each other at the bottom layer will conduct through the top layer of the pressure sensitive layer, and the resistance output value of the port will change with the pressure.5. EXCELLENT PERFORMANCE: Film pressure sensor has static and dynamic pressure sensing and quick response speed, has long durability and lifespan.Specification:Item Type: Thin Film Pressure SensorMode: RF C7.6 L11 LFMaterial: Polyester, FPCBasic Parameters:Thickness: Approx. 0.25mm / 0.01in with rear ADHDriving Force: Approx. 2 g / 0.1 oz, Res less than or equal to 500 Κ ΩPressure Range: Approx. 5g to 2kg / 0.2oz to 4.4lb Mode of Action of Pressure: Contact pressingResistance When not Triggered: Greater than 10M ΩActivation Time: Less than 10mS.Package List:2 x Sensor