Description: Specifications: ColorRed/gray/black/blue Product Size:54x70x6mm Material: Aluminum alloy Weight: Main body 20g Specifications: * This product only supports intel 12th generation CPU, motherboard CPU connector is LGA1700 chipset is H610 B660 Z690 series. Characteristic: 1. Compared with other similar products, this product adopts four-sided flat pressure instead of multi-point pressure, precise positioning, avoiding capacitors, and is good for CPU fixing; 2. The contact surface with the motherboard is flat, and the same specification LOTS original isolation protection pads are used to reduce the pressure on the motherboard and reduce signal interference; 3. The metal side is raised to reduce signal interference on the motherboard side; 4. Sandblasting anode is made of precision CNC aluminum alloy, multi-color optional; Installation process: 1. Place the motherboard horizontally on the desktop and open the CPU clip . 2. Use the included T20 Torx screwdriver to remove the top and put the bottom clip aside . 3. Put the CPU into the socket . 4. Cover the Upgraded buckle on the CPU top cover and wiggle slightly until it clicks into place . 5. Tighten the screws in a half circle at opposite corners. Each screw turns into a half circle and a half circle in diagonal order until the screw is turned on. Will put pressure on the CPU unevenly. Package Included: 1Fixed Bracket, 1L-shaped Screwdriver 1Manual Notes: NOTE Due to the limitation of logistics channels, liquid silicone grease will be returned. If you need silicone grease, please be sure ask the seller before buying