The docking station has a built-in cooling fan and a dual air duct design to dissipate heat for the docking station and the graphics card backplane. Provide dual 8Pin and 16Pin (12VHPWR) graphics card power cables to provide 280W continuous and stable power supply for the graphics card. (This data is measured using a 330W GaN power supply. To ensure system stability, it is recommended that the maximum power consumption of the graphics card used is within 290W.) The docking station Equipped with a chassis, the maximum supported size of the graphics card supported by this chassis is 268mm long, 133mm high, and 52m wide. If the graphics card length exceeds 262mm, it may be necessary to remove the front panel of the chassis for installation. Parameters: Interface:for Thunderbolt3/4 USB4 *2 Chipset: JHL7440 Daisy chain: Support Supported power supply: Support GaN power supply/laptop power supply Applicable scenarios: portable/desktop use PD charging: Max 20V4.25A@85W Power interface: for DELL 7.4*5.0 Graphics card power consumption: 330W (20V) Other functions: Synchronous start and stop (synchronous start and stop means that the docking station, graphics card and power supply start and shut down with the computer.) Special note: 1. Some devices with Thunderbolt3 interfaces actually run at 16Gbps due to computer chipset limitations. 2. Software or games have different requirements for PCI-E bandwidth, and the performance will be different. Mid and low-end graphics cards will have better performance because they do not require high PCI-E bandwidth. Connecting a monitor to the output of the expansion graphics card will achieve better performance. Color:As Shown Material:Metal Package Contents: 1 * docking station with Chassis 1 * for Thunderbolt 4 data cable 1