Testo 310 Set With Printer 0563 3110 Residential Combustion Analyzer Kit         Introduction        Robust and light instrument for daily use    30 seconds sensor zeroing    Integrated condensate trap    Integrated magnets for easy fixing to burner       testo 310 incl. battery and calibration protocol for the measurement of O2, CO, hPa and °C; IR printer (0554 3100); probe 180 mm with cone; case; mains unit incl. cable; silicon hose for pressure measurement; particle filter 5 off; 2 rolls spare thermal paper for printer.    Product Description    The testo 310 has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated. The instrument stands out thanks to its easy handling and simple menu structure. You can read off the measurement values confidently and conveniently from the well-lit display, even in bad light conditions. The fuels are stored not just as numbers, but are each described. At the top edge of the clear display, the symbols for the different measurement menus are always in view. The display and the dirt-insensitive keypad are clearly structured. Operation is very easy – even if you only have one hand free.             Applications • Flue gas measurement • Draught measurement • Ambient CO measurement • Pressure measurement                           Technical Data                                  General technical data                         Weight       (with probe) Approx.