1 Quick Resin Heating Mat: We are committed to providing convenient tools for craft enthusiasts, helping you save time while enjoying the fun of DIY. Considering the conditions of silicone material and resin curing, for safety and not to harm the mold, we designed, tested, and adjusted for a long time, and finally adjusted the maximum temperature to 149F/65C. 2 Just Need 3-4H: When the temperature is adjusted to the highest, it can reduce the curing time from 12 hours to 3-4 hours, during the waiting time, you can watch a movie with your family and friends, and after the movie, you can see the beautiful epoxy resin work. Meanwhile, our epoxy resin curing mat is also very suitable for small business craftsmen, allowing you to fulfill orders faster and improve your production efficiency, which is a very good choice. 3 Reusable & Keep Clean: We specially equipped a silicone mat in the resin curing mat kit, and put the silicone mat on the resin curing mat to keep it warm and prevent the epoxy resin from sticking to the heating mat. 4 Silicone Molds Friendly: We know that craft enthusiasts often use heat guns and torches to speed up resins curing or use high-viscosity resins to shorten the curing time, resulting in increased bubbles, silicone molds tearing, and flawed handicrafts. Therefore, our fast resin heating mat is an ideal solution with fewer bubbles and faster curing to speed up the curing of the resin in a gentler way without damaging the mold. 5 Curing Tips: The thickness of the resin should be within 20mm. If the thickness of the resin is too large, heat will be released, resulting in rapid heating, which may damage the molds. When heating, put the silicone mat on the resin heating mat. The molds need to be in full contact with the silicone mat to ensure uniform heating. Operate at room temperature of 77F (25C), and set the heating pad to the highest temperature (149F/65C). The curing time is the shortest. When heating, please don't leave the heating mat for a long time to ensure safety.