Temperature measurement and control — Range: -40°C to 99°C | Resolution: 1°C Key benefits Wide operating span: Covers deep-freeze conditions up to near-boiling temperatures (-40°C to 99°C), reducing the need for multiple instruments. Clear, usable detail: 1°C resolution gives straightforward, repeatable readings and control steps for most practical applications. Dual function: Designed for both temperature measurement and active temperature control within the same specified range, simplifying system design and inventory. What it does and why you need it Measures and regulates temperature reliably anywhere between -40°C and 99°C. Helps protect temperature-sensitive goods and processes by enabling accurate monitoring and consistent control within the specified limits. Eliminates ambiguity by matching measurement and control ranges exactly (-40°C to 99°C), so you can use one device for both tasks without range conflicts. Important specifications Control range: -40°C to 99°C Measurement range: -40°C to 99°C Temperature resolution: 1°C Compatibility and performance Suitable for systems and equipment that require temperature sensing or control within the stated range; integrate into refrigeration, heating, or process-control setups that accept standard temperature inputs and outputs. Resolution and range make it practical for most commercial, light-industrial, and laboratory uses where 1°C increments are sufficient for safe operation and quality control. Designed to be used where the specified thermal range is required; verify connection and signal compatibility with your controller, relay, or data logger before installation. Practical use scenarios Cold-chain monitoring: Keep freezers and refrigerated storage within required limits down to -40°C for pharmaceuticals, biological samples, or frozen food. Heating and processing: Control water baths, kettles, pasteurization steps, or other heating processes up to 99°C with consistent 1°C increments. Laboratory and light-industrial monitoring: Track and regulate temperatures for sample storage, small incubators, or process stages where temperatures fall anywhere in the -40°C to 99°C band. Notes for selection and installation Confirm electrical and connector compatibility with your control system or sensor inputs prior to purchase. If you require finer than 1°C resolution or a range outside -40°C to 99°C, select a device with those specific capabilities. Reliable temperature measurement and control within a single, clearly defined operating and measurement range: -40°C to 99°C with 1°C resolution.