Temperature Controller Digital Temp Control Switch 50~120 24V DC for Heating Cooling

Feature:1. Simple Operation: Very easy to operate, displaying PV and SV values upon power on. Press the SET button once to start modifying the SV value. You can start using the thermostat in one step.2. Two Control Methods: Supports both on off control and PID control, and the latter doesn't have self tuning function.3. For Heating and Cooling: When the temperature is lower than the set value, turn on the output to start heating. When the temperature is above the set value, turn on the output to start cooling.4. Alarm Function: Over temperature and low temperature alarms, under voltage alarms, and NTC disconnection alarms. With one alarm signal output.5. Other Functions: The temperature controller also has timing mode function and power saving mode function, which will largely simplify the operation.Specification:Item Type: Temperature ControllerModel: TE02-2Material: ABSPower Supply Voltage: 24V DCUsage Temperature: 0-50℃, no freezing or condensation. Display: 2 red digital tubes display. Alarm Display: In the main interface, the digital tube flashes in the SV window to display the alarm code. Alarm Function: Over temperature alarm, low temperature alarm, NTC disconnection alarm, battery low voltage alarm. Alarm Output: Relay 10A 250V AC. Temperature Measurement Accuracy: ± 1℃. Temperature Measurement Range: -50~120℃. Accuracy Level: 0.6% F.SInput Type: NTC 10K 3950Output Type: Relay 10A 250V ACInstallation: 35mm guide rail. .Package List:1 xTemperature Controller1 x ProbeNote:1. When power on, do not touch the terminals as it may cause electric shock. 2. Do not use this product in flammable and explosive gases. Otherwise, there is a possibility of minor injury caused by the explosion. 3. Do not disassemble, modify, or repair the product or come into contact with any internal components. Otherwise, it may cause electric shock, fire, or machine malfunction. 4. Please use a soft cloth or cotton paper to clean stains from the panel.5. The monitor is prone to scratches, and it is prohibited to use hard objects to wipe or touch it. 6. It is prohibited to use hard objects such as screwdrivers or writing pens to operate the panel buttons.