Features: The core-board for Tang Primer20K uses GOWIN Semiconductor GW2A-LV18PG25687 as the main-chip, which has rich internal resources,high-speed and low-cost applications With high-performance DSP, high-speed LVDS interface and BSRAM memory resources. On-board peripheral- components such as DDR- chips and power chips, users can use this core board to quickly develop and verify projects. The for Tang Primer 20K Lite- kit includes a core board and a Lite- backplane. The Lite- backplane leads out most of the IO- ports through pin headers and PMOD interfaces. Users can easily connect other -peripheral modules or circuits for secondary development. The for Tang Primer20K Dock kit includes the core-board and the Dock bottom plate. The Dock backplane has a wealth of peripheral- resources onboard-, such as USB-TAG&UART circuit, Ethernet- PHY and network- port connectors, USB2.0PHY, HDMI-compatible- TX- connector, Audio- output circuit and headphone connector, RGB-screen connector, Camera camera connector. Specifications: Memory: 1Gbits DDR3 Logical Units- (LUT4): 20736 Distributed static- random access memory S-SRAM (bits-): 41472 Block static- random access memory B-SRAM (bits-): 828K The number of block static- random access memory BSRAM (pcs): 46 High-performance DSP module: support 9x9, 18x18, 36x36bit multiplication and 54bit accumulator- Multiplier (18x18 Multiplier): 48 SPI-FLASH: 32M-bit Flexible PLL resources: 4 Phase Locked Loops- (PLLs) Display screen interface: SPI-screen interface DRAM: Onboard128MB DDR3 chip Note: Only the above package content, other products- are not included. Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is 1-3cm. Package includes: 1 x 20K Core Board 1 x Lite- Backplane 1 x 8P 1.0mm to 2.54mm Terminal- Wire 1 x RV- Debugger plus-Module 1 x USB Cable