Table Tennis Cutter Special Scissors Bow Knife Set For Assembling Blade & Rubber

₹3,399.00
और मुफ़्त शिपिंग

Table Tennis Cutter Special Scissors Bow Knife Set For Assembling Blade & Rubber

  • ब्रांड: Unbranded

Table Tennis Cutter Special Scissors Bow Knife Set For Assembling Blade & Rubber

  • ब्रांड: Unbranded
मूल्य: ₹3,399.00
द्वारा बेचा गया:
₹3,399.00
और मुफ़्त शिपिंग

स्टॉक में है

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

Product color: As shown in the figure Product material:Stainless steel product features: Testing: Without attaching the rubber to the Bow Piece, follow steps 3-4, then flip the Bow Piece to check if the curvature of the bow Bow Piece matches that of the Bow Piece (ensure there is no significant between the bottom of the rubber attachment area and the bow Bow Piece). If a noticeable exists, increase the rotation force appropriately until the curvature aligns, then proceed to step 6 to remove the bow Bow Piece. Attaching the Rubber: Apply adhesive to one side of the Bow Piece and the rubber (or test rubber). Attach the rubber smoothly. Installing the Bow Piece: Hook the bow strings on both sides of the bow Bow Piece around the racket handle, ensuring the rotating buckle faces upward. Fit the bow Bow Piece onto the outer edge of the Bow Piece and secure the rotating buckle (the buckle should be installed at the junction of the handle and the Bow Piece). Tightening the Bow Strings: Press the rotating knob and turn it clockwise to tighten the bow strings while adjusting the bow Bow Piece position to maintain symmetry. Apply the same force used during testing to ensure the bow Bow Piece curvature matches the Bow Piece curvature. Cutting the Rubber: Flip the Bow Piece so the rubber faces upward. Use a rolling pin to press and cut along the edge of the Bow Piece from right to left (tilt the rolling pin outward; avoid pressing it inward against the Bow Piece) until the cutting is complete (left-handed users may cut from left to right). Removing the Bow Bow Piece: After cutting, flip the Bow Piece, pull up the rotating knob, and separate the bow Bow Piece by pulling it apart to both sides. Then remove the rotating buckle and take off the bow Bow Piece. Repeat the above steps to cut the rubber on the other side. Precautions: 1. As we all know , the different computers display colors differently, the color of the actual item may vary slightly from the following images. 2. If you feel difficult to choose the size, you can contact us at any time. We will give you some suggestions, but for your reference only. Shipment includes: 1 pc Table tennis rubber cutter
  • Fruugo ID: 414530938-875709766
  • EAN: 9038644994899

डिलीवरी और वापसी

2 दिनों के भीतर भेजा जाएगा

  • STANDARD: मुफ़्त - के बीच वितरण मंगल 21 अक्तूबर 2025–गुरु 06 नवंबर 2025 - मुफ़्त

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Shanghai Ouli Electronic Technology
  • Shanghai Ouli Electronic Technology Co., Ltd.
  • Room 5452, No. 32, Xinxin Road, Chedun Town
  • Songjiang District
  • Shanghai
  • Shanghai
  • CN
  • 201611
  • huyuLLL@outlook.com
  • 13052513846

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • Misty Building B.V.
  • Misty Building B.V.
  • Voltastraat 11, 6902PT
  • Zevenaar
  • Zevenaar
  • Zevenaar
  • NL
  • 6901
  • colotyci@outlook.com
  • +0031641828991