A true diversity receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware. Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder. Two Dipole T antennas will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended. Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying.<br><br>Item: SuperD ELRS 868MHz Diversity Receiver 868MHz MCU: ESP32 PICO D4,Dual SX1276 Antenna Connector: IPEX MHF 1/U.FL RF Frequency:868MHz 868MHz Telemetry Power: 17dBm Receiver Protocol: CRSF Input Voltage: +5V DC @ "+" pad PCB Size: 22mm x 14mm Weight: 1.1g excluding antenna Due to different batches, there may be differences in product appearance, color, and printed text, which will not affect the use. Colour:Black Material:PCB<br><br>Package Contents: 1 x Kit<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.