1.Intelligent temperature controller, refrigeration/heating -50~992.Smart STC-8080H temperature sensor, , Suitable for many occasions.3.Can be used for Tin stove/High temperature flume/UV curing machine/High temperature equipment/Film sealing machine4.Can be used for vegetable farming, warehouse, domestic freezer, Cold storage, poultry farming, water tanks, refrigerator, industrial chiller, boiler, steamer, industrial equipments and other temperature-controlled systems.5.STC-8080H is a universal single-sensor temperature controller with functions such as refrigeration, defrost, and temperature over-limit alarm. The compressor protection delay is adjustable, and the temperature over-limit alarm is adjustable after power on. Suitable for refrigeration industries such as refrigerators and refrigerated trucksThe main function:Measurement, display and control of temperatureDefrost cycle and defrost time are adjustableTemperature over-limit alarm functionCompressor delay start protectionSensor fault starts and shuts down proportionallyStandard sizes:1. Front panel size: length 75x width 34.5 (mm)2. Installation opening size: length 71x width 29 (mm)3. Overall machine size: length 75x width 34.5x depth 85 (mm)4. Sensor cable length: 2 meters (including probe length)Technical Parameters:1. Power supply: 220VAC +10%/-15%, 50/60Hz2. Machine power consumption: 3W3. Temperature measurement range: -50~994. Temperature control range: -40~50 5. Temperature resolution: 16. Temperature measurement accuracy: 1 at 50~70. The rest 27. Refrigeration output contact capacity: 10A/277VAC8. Defrost output contact capacity: 10A/277VAC9. Sensor failure delay: 1 minute10. Sensor type: sensor11. Front panel level: IP6412. Working environment temperature: 0~6013. Working environment temperature: 20~85% (no condensation)14. Storage temperature: -30~7515.Colour:Black16.Material:ABSPackage Contents:1 x Temperature ControllerOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.