Description: for SSA6G is a portable panoramic spectrum analyzer designed to display signal spectrum in the frequency range from 35MHz to 6200MHz. The analyzer finds the amplitude and frequency of components of the analyzed process. for spectrum analyzer is to find the signal amplitude for all widely used technologies: including Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS and GLONASS. Application: for SSA6G is primarily intended for field operation. The device is rugged and light with low energy consumption. It enables service centers and maintenance to perform on-the-spot HF analysis for commissioning and repair works. Moreover, the spectrum analyzer is a perfect solution for repair workshops and radio amateurs. Principle of Operation: The spectrum analyzer is a portable device which is connected to the measured circuit and has an power supply. The device has a 3.2Inch color resistive touch screen to display the signal spectrum and to control the device. The device is controlled by one of these three ways: 1. By buttons and touchscreen on the device; 2. By a smartphone or tablet for Android; 3. By a PC or laptop with for . The data between the analyzer and smartphone/tablet/PC is transmitted through Bluetooth or USB-cable. The Bluetooth range is up to 10m (Password for connecting via Bluetooth: 1234). All the measured data is displayed in real time on the screen of the device or smartphone/tablet/PC. You can install the analyzer software to control by smartphone or tablet from the Play or download from other sources. You can download the analyzer software to control by PC or laptop. 7 or higher and the latest version of Java Virtual Machine are required for the correct work of application. The application requires full (100%) support for OpenGL version 2.1 and higher. Basic functions of the analyzer software: Displays the signal spectrum graphically and sets up the frequency range and reference limit. Sets up and manages absolute and relative () markers. Searches one or a series (up to ten) of maximum values of the signal in the instantaneous or tracking mode. Sets and stores unique identifiers of the frequency ranges - bands. For instance, a band titled DCS UpLink can be set for the range 1710-1785 MHz. Additionally, working frequency bands can be set for each operator. This option considerably facilitates the HF analysis and identification for the signals of conventional technologies. Has preset bands and is to store the bands in a file and share them with other devices to control the spectrum analyzer SSA6G. Has the tracing mode that generates a signal spectrum averaged by a number of measurements. In addition to the average spectrum, extreme values and moving average values can be displayed as well. Stores the settings for the spectrum scanning (band limits, attenuator value and others) for a quick and easy switching into the required measurement mode. Note:Due to different factory batches, slight differences in appearance not affect the use. Colour:Black Material:aluminium alloy Package Contents: 1 * RF Spectrum Analyzer 1 * HT6 Antenna Set Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.