3 Colors Change With Water Temperature: The Integrated Temperature Sensor; In The Led Shower Head Lets You Know The Water Temperature While Showering. Blue: Cold Water Below 31, Purple: Hot Water Between 32-38, Red: Hot Water Between 39-45. Flashing Red: Hot Water Above 45&Deg;C.No Batteries Or Other Power Sources Required: Leds Are Powered By Tap Water, Which Is Energy Efficient And Environmentally Friendly .Chromed Abs Plastic : Excellent Resistance To Corrosion, No Lighting Color Change.Easy To Clean. Install: Compatible With 2 Gpm/1 Gpm, And Can Be Connected To Any Standard Shower Accessory In Minutes Without Tools.Safe To Use: This Square Shower Has A Led Has Passed Ce/Rohs/Emc/Pah Certification And Led Lifespan Is Up To 6000 Hours.Product DescriptionHandheld Shower Head Temperature Control Square Led 8 Inch 3 Color FadingNo Power Required, As Long As There Is Water Flow To Emit Light, The Light Can Be Turned Off Without Water Flow, And The Light Color Can Be Changed With The Change Of Water Temperature.By Visually Observing The Changing Water Color, You Can Understand The Water Temperature More Intuitively Without Frequently Adjusting The Water Valve.This Shower Is Hydro Powered. Electricity, And The Water Pipe Is Separate And Must Be Used.This Product Uses A Soft Glue Nozzle, Which Is Not Only Strong And Not Easy To Break. Block, But Also A Cleaning Ball Integrated In The Shower Head To Avoid Condensation At The End Of The Shower. Inside The Shower.It Is The Cambia Led Color In The Base Alla Tempatura Dell'Acqua.When The Water Temperature Is Below 32 Degrees, It Turns Blue Freely.When The Water Temperature Is 32-32 Degrees. 38 Degrees, The Display Is Pink.When The Water Temperature Is 39 To 45 Degrees, It Will Appear Red. When The Water Temperature Exceeds 45C, The Red Light Flashes To Remind You Not To Burn Yourself Read MoreSpecification: Color: 3 ColorsSquareSurface Treatment: ElectroplatingMaterial: Abs TechnopolymerLed Color: Blue, Pink, RedProduct Size ;: 200Mm*200Mm*15MmInterface Size: 20Mm Internal Thread (Common Interface)Features: 1. Head To Toe Fancy Leds. 2. When The Faucet Senses Water Flow, The Led Lights Up. 3. Led Color Changes With Water Temperature. 4. When The Water Temperature Is 31, The Indicator Will Automatically Turn Blue. 5. When The Water Temperature Is 32 38 Degrees, The Light Automatically Turns Purple. 6. When The Water Temperature Is Between 39 And 45 Degrees, It Will Automatically Turn Red. 7. When The Water Temperature Exceeds 45 Degrees, Red Will Flash Automatically To Warn That The Water Temperature Is Too High. 8. No Battery Required. 9. Easy To Use. Install And Disassemble. 10. Ideal For Beautifying The BathroomRead MoreHow To Install: 1. Screw The Connector Firmly Into The Shower Head. 2. Screw The Other Side From Connector To; A Standard 1/2 Inch Pipe. 3. Connect To The Suspension Arm (Extensions Are Not Included). 4. It Can Be Hung Up To The Ceiling Mount.Note: Due To Different Monitors And Lighting Environments, The Actual Color Is Slightly Different From The Picture, Please Understand. Please Allow A Slight Deviation (&Plusmn; 1Cm) From The Manual Measurement Data.Read More