Solar Panel Charge Controller PWM 12V/24V Auto PWM Regulator LCD Display

Features 1、LCD screen for dynamic display of equipment running data and working status. 2、The user interface is simple， humanized button setup， more comfortable and convenient to operate. 3、Compared with ordinary solar charge controller， the MPPT controller can improve efficiency by 10% -30%. 4、Standby energy saving， standby power consumption is only 10ma-15ma. 5、This is a dual-time controller into the dusk (evening) working time ，an interval of rest or pause time， dawn working time (morning light function)，the user can according to their needs ，set a different time 6、Support PWM charging mode， parameter users can reset， a key to open and close the load， a key to restore the factory settings. 7、With battery reverse discharge protection， battery polarity protection， battery undervoltage protection， overload， short circuit protection， automatic temperature compensation function. Specification Condition: 100% Brand NewItem Type: Solar Charge ControllerMaterial: PPColor: As shown in the pictureSize: Approx.14.1x8.5x3.7cm / 5.6x3.3x1.5in Weight: Approx.232g/8.2ozRated Operating Current: 20AInstallation Line Number: 8mm²Installation Line Number (American standard): 8 (AWG)Battery Undervoltage Protection: 10.6V/21.2VSystem No-load Loss: ≤13mALoop Step-down: ≤100mVWorking Temperature: -10 ° C ~ 60 ° CStorage Temperature: -30 ° C ~ 70 ° CHumidity Requirement: ≤90%， no condensationTemperature Compensation: -4mV/cell/°CTemperature Probe Material: NTC 100k thermisto Package List 1 x Solar Charge Controller1 x Temperature Sensor1 x Instruction Manual Note 1. Please allow 1-2cm error due to manual measurement. Thanks for your understanding.2. Monitors are not calibrated same， item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.