Solar Outdoor Security Flood Lamp with Motion Sensor and Remote Control

Product Solar Light with Remote Control and PIR (2-in-1) √ Prior to the first use: 1. The light should be exposed under direct sunshine for eight hours to ensure its sufficiently recharged. 2. Before installation, please press the switch on the solar light for 3-5 seconds, flashing state, you can use the remote control to control the light. √ Remote control working mode:PIR: High light when people come, 20-25s lights off after people leave Dim light+human induction(PIR): High light when people come, low-level light after people leave Dim light √ Features: 1. Higher-capacity btteriesunique low light mode make it last longer 2. Fixed joint parts can rotate 3. Remote control distance: 6-8m 4. Sensing distance: 5-7m 5. Induction angle: 120° 6. Adjustable installation angle: 180° √ Installation: The light can be installed anywhere exposed under direct sunshine at a height of 3-5 meters. Mount the light with the anchors and screws included. √ Troubleshooting: If the light does not work, please follow these steps: 1. Check the switch and make sure its turn ON. 2. Check the place you mount the device and make sure the solar panel is not in shade during the daytime. 3. Check and make sure the battery has been charged, it needs a few hours before its sufficiently recharged. √ Note 1. At night, when there is light shining on the solar panel, the solar panel will be in the charging state and the light does not work, so the solar panel needs to be moved away in time. Make sure the lights are working. 2. Even though our lights are made of excellent materials, they cant stand the damage of high temperature for a long time. Therefore, installation solar lights panels should keep away from heat and fire to protect and extend their service life.