Pengjia hot cutting machine is suitable for cutting materials and settings. Suitable for cutting: woven belts, woven mesh tubes, PET mesh tubes, nylon buckles, clothing linings, webbing, plastic zippers, nylon zippers, cotton ropes, PP ropes, POLY ropes, shoe ropes, flat ropes, etc., printed belts and other clothing and luggage lines are all cut in seconds. When cutting, adjust the temperature knob according to the thickness and melting point of the cutting material to adjust the temperature. The is neat and there is no accumulation. The incision is neatly fused. Don't stretch the elastic band when cutting, otherwise the edge be naturally straightened to cut a good incision. When cutting plastic belts, adjust the temperature higher, don't down vertically, and slowly melt and cut from the outside to the inside. After the length is determined, the screw should be tightened and not moved. Don't tighten the screw too hard to avoid slipping the screw. 1) Input voltage: AC200-240V 2) Maximum output voltage and current: 12V 5A power 60W 3) Wire parameters: diameter 0.25mm 4) Stepless temperature adjustment function: 0-700 degrees, adjustable at 5) Cutting range: lace, hair accessories, ribbons, ribbons, braided ribbons, threaded ribbons, cloth trademarks, elastic bands, buckles, etc. Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on Voltage: AC220V Color: Black Material: ABS Package Contents: 1 set x DRQG50-B ribbon electric hot cutting machine (with fan) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.