SI4732 V6.8 FPC Module with 2M Expansion Chip for UVK5 K6 HF Shortwave Full Band Single Sideband Receiver

₹2,399.00
और मुफ़्त शिपिंग

SI4732 V6.8 FPC Module with 2M Expansion Chip for UVK5 K6 HF Shortwave Full Band Single Sideband Receiver

  • ब्रांड: Unbranded

SI4732 V6.8 FPC Module with 2M Expansion Chip for UVK5 K6 HF Shortwave Full Band Single Sideband Receiver

  • ब्रांड: Unbranded
RRP: ₹4,399.00
मूल्य: ₹2,399.00
आपकी बचत: ₹2,000.00 (45%)
द्वारा बेचा गया:
₹2,399.00
और मुफ़्त शिपिंग

स्टॉक में है

हम निम्नलिखित भुगतान विधियाँ स्वीकार करते हैं

विवरण

SI4732 V6.8 Upgraded version! ! ! Using FPC 0.2mm thin board, compared with the traditional fiber thick board PCB, it reduces the parasitic inductance to the ground. And the speaker is not installed on top. Using the on-board interface, the board does not need to solder the feeder. In addition, the top ground wire has a welding hole on the right side of the fixed position. The soldering iron can be soldered firmly with a light touch, which greatly reduces the difficulty of installation and construction. ient suppression diode is added to suppress ient voltage, and the parasitic capacitance of the protection component itself the impedance matching during the original signal mission, preventing the signal from being distorted. The internal amplifier circuit IC uses components with a maximum signal gain of 19dB. There is no need to use an external active antenna like the old version. Only an ordinary pull-rod antenna is needed to obtain good reception performance. (Not included) Add an audio amplifier circuit to solve the problem of low volume of SSB single-sideband in CEC English firmware. FM (frequency modulation) and HF (amplitude modulation medium and short wave) bandpass filters are added to the adapter board, which has stronger anti-interference ability. High-quality high-frequency winding chip inductors are , with high Q value, small internal resistance and stronger filtering selectivity. The soft board FPC uses a non-glue substrate, and PI is divided into two types: glue substrate and non-glue substrate. This product uses a non-glue substrate, which is more to high temperature and has a longer life. The cost of using immersion gold process is higher than that of traditional tin-plated plate, which has higher reliability and stability in conductivity and oxidation resistance. The components are soldered by machine, which has a higher yield rate than traditional manual soldering, and
  • Fruugo ID: 404153245-857769301
  • EAN: 8091867307465

डिलीवरी और वापसी

2 दिनों के भीतर भेजा जाएगा

  • STANDARD: मुफ़्त - के बीच वितरण गुरु 09 अक्तूबर 2025–गुरु 16 अक्तूबर 2025 - मुफ़्त

चीन से शिप हो रहा है।

हम आपके द्वारा ऑर्डर किए गए उत्पादों को पूरी तरह से और आपके विनिर्देशों के अनुसार डिलीवर करने की पूरी कोशिश करते हैं। हालाँकि, यदि आपको अधूरा ऑर्डर या आपके ऑर्डर से कोई अलग आइटम प्राप्त होता है या किसी अन्य कारण से यदि आप अपने ऑर्डर से संतुष्ट नहीं हैं तो आप ऑर्डर या ऑर्डर में शामिल कोई भी उत्पाद वापस कर सकते हैं और आइटम के लिए पूर्ण रिफ़ंड प्राप्त कर सकते हैं। सम्पूर्ण वापसी पॉलिसी दिखाएँ

उत्पाद अनुपालन विवरण

कृपया नीचे दी गई इस उत्पाद से संबंधित विशिष्ट अनुपालन जानकारी देखें।

निम्नलिखित जानकारी इस उत्पाद को बेचने वाले स्वतंत्र तृतीय-पक्ष खुदरा विक्रेता द्वारा प्रदान की गई है।

निर्माता:
नीचे Fruugo पर बिक्री किए जाने वाले संबंधित उत्पाद निर्माता के संपर्क विवरण की जानकारी संबधी सूचना है।

  • Velvet Hive
  • Dongguan Zuiyu Electronic Technology Co., Ltd.
  • Room 401, No. 19, Dongxiang, Yanggonglang, Qiaotou Town, Dongguan City, Guangdong Province
  • Dongguan
  • CN
  • 523520
  • simona14@163.com
  • 17512067209

यूरोपीय संघ(EU) में जिम्‍मेदार व्यक्ति:
नीचे यूरोपीय संघ में जिम्मेदार व्यक्ति की संपर्क जानकारी संबंधी सूचना है। जिम्मेदार व्यक्ति यूरोपीय संघ में स्थित पदनामित आर्थिक ऑपरेटर है जो यूरोपीय संघ में बिक्री किए जाने वाले संबंधित उत्पाद संबंधी अनुपालन दायित्वों के लिए जिम्मेदार है।

  • Jean Luc
  • In Memoria Futuri SAS
  • 3 RUE DU PAS DE LA MULE 75004 PARIS
  • Paris
  • FR
  • 75004
  • infoapexchen@gmail.com
  • 33 745713901