Hign-concerned Chemical : None is_customized : Yes Type : Other Origin : Mainland China Product classification: P1: hydrophobic carbon paper+foam nickel+waterproof film, 10cmx10cm P2: hydrophobic carbon paper+waterproof film+foam nickel, 10cmx10cm P3: hydrophobic carbon cloth+foam nickel+waterproof membrane, 10cmx10cm N1: hydrophilic carbon paper+foam nickel+waterproof membrane, 10cmx10cm N2: hydrophilic carbon paper+waterproof film+foam nickel, 10cmx10cm N3: hydrophilic carbon cloth+foam nickel+waterproof membrane, 10cmx10cm Use and cutting of composite matrix: 1. The composite matrix does not require pre-treatment. 2. Please evenly coat the catalytic material on carbon paper/cloth and dry to obtain the required electrode material. 3. The substrate materials are all in the form of thin sheets, which can be freely cut during use. 4. When using, one side of the carbon paper/cloth is facing the electrolyte. Packaging and preservation of composite matrix: 1. The goods will be wrapped with foam and fixed with wooden boards. 2. Please be careful to prevent the composite matrix from falling off the ground, bending, etc. to prevent the carbon paper from cracking or layering. 3. It is recommended to use a self sealing bag for storage. The electrode composite matrix is formed by rolling and combining carbon paper or carbon cloth, waterproof layer, and flow collecting layer, which can prolong the service life of the electrode and effectively avoid problems such as leakage, seepage, and being submerged by the electrolyte and blocked by the oxygen channel during the use of the air electrode. The composite matrix has the advantages of convenient use, firm bonding, good conductivity, and convenient use, and has great advantages in metal fuel cells such as zinc air batteries. 1) The electrode composite matrix may slightly curl after rolling. If you mind, please purchase with caution! 2) Please handle and store the product with care, and keep the electrodes flat and not folded. 3) Please try to use an office paper cutter when cutting. Cutting with scissors can easily damage the product and cause layering. window.adminAccountId=6000360036;