IDE is compatible with ATA33/66/100. SD supports high-speed cards. SD card has the characteristics of small size, capacity, shock and moisture resistance, high temperature resistance, stable performance, permanent and effective data storage, no noise, and no errors. Compatible with , WINCE, WIN98/XP/VISTA/NT, WIN7/8/10 and LINUX operating . Application areas: industrial computer motherboards, industrial computers, computers, instrumentation, soft routing, machines, hard disk video recorders. Main performance: 1. FC1307A scheme. 2. The equivalent industrial use can flexibly plug and unplug the SSD, and use the SD as a mobile hard disk to realize the flexible movement of data storage. 3. After the hard disk is transferred, it can be used as a system disk or a data disk. 4. SD supports up to 128GB. 5. Supports edge openings. SD mobile storage can be realized by opening a slot on the 's device chassis facing the SD card slot. 6. Working with BIOS and , it can support SATA, SD hot swap, plug and play, and can be used without any driver. When the SD card is hot-swapped, pay attention to the coordination of BIOS, and application programs. When reading and writing data, do not hot-plug to avoid data loss. In general, cold swapping is recommended to realize mobile storage of data. 7. Size: Compatible with 2.5-inch hard disk size. It can be used on with old IDE44PIN interface to speed. Precautions: using this product, please insert the SD card into the corresponding SD socket, and then connect the SATA power supply and SATA data cable to the SATA device. After booting, the LED light flashes, indicating that the SD card data reading is normal. After the first use and the SD card configurationchange, the SD card needs to be initialized and formatted. After formatting, you can any data operations on the SD card. Colour:black Material:PCB Package Contents: 1 x Adapter Card Only the above package content, other are not included. Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.