Features: With the characteristic of waterproof, dustproof, anti-seismic, anti-knock, suitable for all kinds of environments. High precision sensors are widely used in the field: mixing station, batching machine, asphalt station. Adopt high quality alloy steel, and the design of anti-pressure bi-directional bearing, so with high precision and good stability. The design of cover plate, fully protect the sensor chip, use nut fixed interface, avoid strong drag to cause the interface to fall off. Equipped with 3 meters international superior sensor cable. This S type beam load cell scale sensor is easy installation. Specifications: Type: weighing Material:alloy steel Physical properties of materials: conductors Crystal structure of materials: polycrystalline Process: film Output signal: analog Protection level: IP67 Linearity: 0.02%F.S. Delay: 0.02%F.S. Repeatability: 0.02%F.S. Sensitivity: 2.0mv/v Drift: 0.02%F.S Input impedance: 35010 Output impedance: 3505 Weight: 700g Range 5kg-500kg Input resistance: 35010 Sensitivity 2.0mv/v Output resistance 3505 Nonlinear/hysteresis/ repeatability 0.02%FS Insulation resistance 5000M creep 0.02%FS bridge voltage 10(DC/AC) V Zero output 1.00%FS Working temperature - 20 to +60 Zero point temperature effect 0.02%FS/10 Safety overload 120%FS Output temperature effect 0.02%FS/10 Material alloy steel Wiring method input: red+, black-, output: green+, white- Package Included: 1x S type pressure sensor