RP2350A Microcontroller chip designed by Raspberry Pi.Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz.520KB of SRAM, and 4MB of on-board Flash memory.Type-C connector, keeps it up to date, easier to use.Lithium battery recharge/discharge header, suitable for mobile devices.Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current.Castellated module allows soldering directly to carrier boards.USB 1.1 with device and host support.Low-power sleep and dormant modes.Drag-and-drop programming using mass storage over USB.26 x multi-function GPIO pins.2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels.Accurate clock and timer on-chip.Temperature sensor.Accelerated floating-point libraries on-chip.12 x Programmable I/O (PIO) state machines for custom peripheral support.Colour:blueMaterial:PCBstyle:Soldered / No SolderedThe actual product may have slight color difference or difference, which will not affect the use Package Contents:1 * Developmend BoardOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.