Features:RP2350-Touch-LCD-1.28-B is a low-cost, high-performance RP2350 MCU Board, Based on Raspberry Pi RP2350, with 1.28inch Touch LCD and CNC metal case.Tiny size with onboard 1.28inch capacitive touch display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope) and so on, which makes it easy for you to integrate it into products quickly.Adopts unique dual-core and dual-architecture design: dual-core Arm Cortex-M33 processor and dual-core Hazard3 RISC-V processor, flexible clock running up to 150 MHz.520KB of SRAM, and 16MB of onboard Flash memory.Type-C connector, keeps it up to date, easier to use. Onboard 1.28inch capacitive touch LCD, 240x240 pixels, supports 65K color for clear color picture display.Lithium battery recharge/discharge header, suitable for mobile devices.USB 1.1 with device and host support.Low-power sleep and dormant modes.Drag-and-drop programming using mass storage over USB.Accurate clock and timer on-chip.Temperature sensor.6 x GPIO pin via SH1.0 connector.Colour:blackMaterial:Metal + Acrylic + Electronic ComponentsThe actual product may have slight color difference or difference, which will not affect the use Package Contents:1 * Development Board1 * cable Only the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.