Feature: 1. The rotating torsion sensor can display the current measured torsion value and speed value in real time, and can directly calculate the current power value. 2. Support RS485 communication, and support active upload protocol, communication rate up to 500 times per second. 3. Using strain gauge electrical measurement technology, the electrical signal of the elastic shaft torsion can be measured by supplying power to the strain bridge. 4. Can perform simple calibration, zero adjustment, filtering and other operations, allowing 200% overload. 5. The rotating torsion sensor has an accuracy of more than 1/1000 and has excellent zero position stability. 6. Widely used in the detection of torsion, speed and power of motors, generators, reducers, and diesel engines. Specification: Item Type: Rotating Torsion Sensor Material: Stainless steel Model: DYN-210 Speed Range: ≤15000rpm Speed Signal: 120/60/10pulse/r, 4-20mA, 0-20mA, 0-5V, 0-10V Torsion Signal: 5-15KHz Zero Output: ±2%F.S. Non Linearity: 0.1%F.S. Hysteresis: 0.5%F.S. Repeatability: 0.2%F.S. Creep (30 Minutes): 0.03%F.S. Temperature Sensitivity Drift: 0.01%F.S./10℃ Zero Temperature Drift: 0.01%F.S./10℃ Response Time: 0.6ms (50% response) Response Frequency: 1kHz Maximum Torsion Angle: 2.60 x 10rad (0.149°) Moment of Inertia: 0.38kg/cm Rotor Vibration Natural Frequency: 19.4kHz Torsion Constant: 3.85 x 10Nm/rad Annual Stability: 0.3%/year Load Resistance: >2kΩ Working Voltage: DC24V 0.2A Current Consumption: