Detection distance: 15 mm Type: NPN, NC (Normally Closed) Supply voltage: DC 10 30 V Current consumption: 15 mA Load current: 100 mA Key benefits Noncontact sensing with a defined 15 mm range for reliable presence detection in tight spaces. NPN normally closed output provides a safe default state and supports simple sinking wiring to PLCs and logic inputs. Broad DC supply tolerance (10 30 V) allows compatibility with common automation systems and powered electronics. Low power draw (15 mA) helps minimize energy use and heat generation while still supporting loads up to 100 mA. Compact and straightforward wiring, suitable for compact machinery and cramped control panels. What makes it work for you Function: Non contact proximity sensing with a clear 15 mm detection zone. Compatibility: NPN sinking outputs and DC supply in the 10 30 V range work with most PLCs and control circuits. Size and form: Compact design suited to installations with limited space. Performance: Low current consumption with a solid load current rating supports small actuators, indicators, or logic inputs. Typical use scenarios Part presence detection on a small conveyor line: mount near the belt. When a part comes within 15 mm, the NC output switches, and a PLC input can register the event via sinking configuration. Endoftravel or limit sensing for a compact linear actuator: power from DC 10 30 V, use the NC output to indicate the actuator has reached its target, feeding a PLC or control circuit. Safety interlock or presence sensing inside a compact enclosure: use as a simple switch to monitor guard or door position, with the NC output providing a safe default state for the control logic.