Single color LED strips wireless RF iron shell 86 full touch controller is a LED controller with advanced point-control touch technology. Dynamic lighting effects such as gradient, jump and flash can be selected according to different needs of customers, as well as a variety of static colors to choose from. It can be widely used in boat, camper van, kitchen (under Cabinet), truck, marine, led puck lights, RV, living room, bedroom, bathroom, dinette lights and more. Suitable for single color LED strips, COB LED light strips , LED modules. Panel switch, no wiring required. Working voltage:DC 5-24V Working temperature:-20-60° Output current/power:15A Less than 2CH, 5V Less than 150W, 12V Less than 360W, 24V Less than 720W Weight:170 grams Input:positive/negative pole of input power supply OUTPUT:output light with positive/negative pole Brightness addition and subtraction:stepless dimming. Speed plus and minus:10 levels. Code matching & Code clearing(Method of connection and disconnection) Code matching:keep press the Night light button within 5 seconds after the controller is powered on, and the light bar flashes slowly for 3 times. Code clearing:keep press the Maximum brightness key within 5 seconds after the controller is powered on, and the light bar flashes quickly for 3 times. Colour:As Shown Material:plastic+Metal Size:L85xW62xH22mm Package Contents: 1 * RF Wireless Dimmer Control Kit Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.