Qukaim Electronic Engine Speed Controller Generator Speed Controller, Electronic Engine Governor Control Board for 12V/24V, Slow Start Idle

Features Compatible With Multiple Models: Designed for seamless integration with EFC3408324, DYNA2000, and DYNA2500 generators, ensuring versatile application across various systems Advanced Closed Loop Control: Features a fully electronic design for precise engine speed management, enabling quick and accurate responses to changing load conditions Customizable Parameter Settings: Offers a separate circuit for fine-tuning proportional, integral, and differential values, allowing for tailored performance to meet specific operational needs Pre-Adjusted For High Power: This controller comes pre-set for optimal speed regulation, capable of directly driving engines exceeding 500KK for enhanced efficiency and power Robust Protection Mechanisms: Equipped with safeguards against reverse battery voltage, transient pulse voltage, and actuator short circuits, ensuring reliable and safe operation in all conditions Features: 1、APPLICABLE MODEL: 3044196 generator speed controller, suitable for EFC3408324 DYNA2000 DYNA2500 generator models, with good compatibility. 2、CLOSE LOOP CONTROL: Fully electronic closed loop control design, to control engine speed with fast and accurate response to instantaneous load changes. 3、PARAMETER REGULATION: Separate circuit allows adjustment of proportional, integral, and differential value, acting together to provide control, with accurate adjustment. 4、PRE ADJUST DESIGN: The controller is pre adjusted, including speed regulation and working speed, with high power, can directly drive engines above 500KK. 5、GOOD PROTECTION: The governor board provides safe protection against reverse battery voltage, transient pulse voltage, and actuator short circuit faults. Specification: Item Type: Generator Speed Controller Material: ABS Input Power Supply: Power Supply Voltage: 12V 24V Ground Polarity: Negative Electrode Power Consumption: 40mA Actuator Continuous Current: Minimum 1A, Maximum 4.5A (maximum current can reach 8A) Speed Sensor Signal: 2-120V RMS Technical Specification: Rotational Speed Stability: Better than ±0.25% Speed Range: 1KHz-6.5KHz Thermal Stability: Maximum ±0.7% IDLE Regulation: 260±20Hz-85% of rated speed DROOP Regulation: The minimum position is 15Hz ± 6Hz per ampere load current change, and the maximum position is 400Hz ± 75Hz per ampere load current change External Speed Adjustment: ± 200Hz (external 1KΩ) AUX Input Sensitivity: 148Hz/1V, ±10Hz, Impedance: 1MΩ Environmental Science: Operating Temperature Range: -40℃-85℃ Operating Humidity Range: Maximum 95% Storage Temperature: -55℃-92℃ Vibration: 20-100HZ, 500mm Per Sec Package List: 1 x Generator Speed Controller Package List 1 x Generator Speed Controller