Good clock replacement. This kit is good size replacement both in terms of the shaft and the size of the hands. It can be a replacement for your broken clock.Simple style clock movementIt can match to diverse colors, patterns,shapes clock panel, it will not stand out, good movement will work well. Simple design, easy to use.Wide applicationYou are enable to use it to repair,replace or make a clock; Applicable to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.and specially suitable for DIY quartz wall clock replacement movement parts, etc.Specification:Color: blackMaterial: plastic and aluminumPower:AA battery (not included)Total shaft length: 13 mm ( 0.51 inches)Thread length: 6 mm (0.24 inches)The hour hand :90 mm/ 3.54 inchesThe minute hand: 124 mm/ 4.88 inchesRated Voltage: 1.5VNote:There are some clock parts made of aluminum, please do not install them with too much pressure or they will be bent.Please do not use alkaline battery, rechargeable battery, or they will damage the movement.Instruction:1. Attach the clockwork to the product to be installed.2, is installed in accordance with the standard 12 points,when you install it, please keep the hour hand and minute hand parallel3. Pull out the positioning pin from behind the clockwork and insert the battery.(Do not insert the battery and then pull out the locking pin.)Package Contents:1 x Quartz clock movement1 x Second close nut1 x Minute hand1 x Hour hand1 X Plastic washer1 X Brass washer1 X Brass nutOnly the above package content, other products are not included.Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.